general finishes oil and urethane topcoat

The night tables were re-stained with General Finishes Java Gel Stain. Learn How to Hand Distress General Finishes Milk Paint athttp://youtu.be/DQilIHtFxpY The use of a screwdriver can disfigure the rim and lid, impairing a complete seal. This may be why the finish is performing differently on the leaves vs the table top. When I looked for signs of craftsmanship I found out that it was built in Yugoslavia, which I found interesting and made it even more special to refinish! Wipe on with a lint free cloth, natural bristle brush, foam brush, or paint pad applicator. Sand lightly with a used 220 sanding PAD to knock down the original finish before re-coating. The second layer of top coat will replace the appearance of the first. I really wanted to embrace the British Colonial era, and I knew I wanted to focus more on the finish of the body, rather than the center image transfer. She brought the wood back to IL and began searching for someone to turn it into a dining set. Day 2: Level sand with 320-grit sandpaper. Liberon 0000 Steel Wool is a good choice for steel wool, as it does not shred as easily as the hardware store brands. The legs are stained cherry. Avoid wiping used brushes on the lid. Application materials, such as brushes and towels, containing oil-based productsmay spontaneously catch fire if improperly discarded. I used all General Finishes products for this one. Decant what you will use into a bowl, paper cup, or plate, and close can lid as you work. The top is done with GF Java Gel Stain & GF Wipe On Urethane. He says, "Finished with Seal-a-Cell clear and Arm-R-Seal satin. "Looking for something truly unique? Arm-R-Seal is General Finishes' premium oil-based urethane-alkyd topcoat for use on indoor wood projects. This product can expose you to chemicals including Crystalline silica, respirable powder, which is known to the State of California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. Original hardware with key. I love it so much that I almost kept it (that should surprise few because I AM a hoarder). Finished with General Finishes Seal-A-Cell and Arm-R-Seal products." Sometimes oily woods dry fine and sometimes they take weeks. You can also purchase GF products from any of the 31 Illinois JC Licht locations. Allow oil to dry overnight before applying GF product. The body is hand painted in General Finishes Black Pepper Chalk Style Paint and sealed with Annie Sloan black wax. To be used as a satin finish over intact existing poly-urethane varnish systems on dimensionally stable wood (i.e. It took a can of stripper and several sanding pads but I could not be more surprised and pleased with the final results. Never give anything by mouth to an unconscious person.Prop 65 WARNING: California to cause cancer, and Toluene, which is known to the State of California to cause birth defects or other reproductive harm. George Baumgartner refinished this lovely oak desk using one coat of General Finishes Brown Mahogany Gel Stain topped with three coats of Gel Topcoat Satin. Adhesion failure is often more obvious in the deepest patterns of grain becausethe contamination is driven deep into the grain.

Zybooks Is Bad, Articles G